Brandon Training

This course is intended for delegates who use safety harness and lanyards in the course of their work. Delegates will achieve an understanding of the requirements under the Work at Height Regulations 2005, including the safe selection, use and inspection of harnesses and lanyards

This course is the internationally recognised operators course, which teaches delegates how to use specific catagories of Mobile Elevated Work Platform. It concentrates on the safe use of MEWP's, enabling delegates to become fully competent to drive MEWP's safely. This course concentrates on the Scissor Lift (SL) AND the Self Propelled Boom (SPB) these machines are also known as Cherry Pickers, Genie Lifts, JLG's and Magic Carpets

This course is aimed at users of mobile access towers (both alloy and fibreglass) and instructs delegates on how to safely erect, move, inspect and dismantle mobile access towers. The course is recognised by the HSE. The official PASMA (Prefabricated Access Suppliers and Manufacturers Association) certification satisfies the ‘Provision and Use of Work Equipment Regulations 1998’ (PUWER) and the ‘Work at Height Regulations 2005.’

This course is aimed at users of mobile access towers (both alloy and fibreglass) and instructs delegates on how to safely erect, move, inspect and dismantle mobile access towers. The course is recognised by the HSE. The official PASMA (Prefabricated Access Suppliers and Manufacturers Association) certification satisfies the ‘Provision and Use of Work Equipment Regulations 1998’ (PUWER) and the ‘Work at Height Regulations 2005.’

SMSTS - Site Management Safety Training Scheme - Course is available as block release or delivered 1 day per week over 5 weeks. This course if for managers and supervisors who are required to understand and implement H&S policy and legislation for a site. This qualification is listed in the ACOP for CDM 2007 regulations

This course is aimed at users of mobile access towers (both alloy and fibreglass) and instructs delegates on how to safely erect, move, inspect and dismantle mobile access towers. The course is recognised by the HSE. The official PASMA (Prefabricated Access Suppliers and Manufacturers Association) certification satisfies the ‘Provision and Use of Work Equipment Regulations 1998’ (PUWER) and the ‘Work at Height Regulations 2005.’

This course is aimed at users of mobile access towers (both alloy and fibreglass) and instructs delegates on how to safely erect, move, inspect and dismantle mobile access towers. The course is recognised by the HSE. The official PASMA (Prefabricated Access Suppliers and Manufacturers Association) certification satisfies the ‘Provision and Use of Work Equipment Regulations 1998’ (PUWER) and the ‘Work at Height Regulations 2005.’

This course is designed to fulfil the employers duty of care under the Health and Safety at Work Act and PUWER regulations / LOLER regulations for Lifting Equipment. We will tailor this course specifically towards your companies trade and train delegates on the safe use of the tools and equipment that they use in their work. This course is most effective when combined with Coaching Skills / Effective Toolbox Talks training to enable your competent staff to train other operatives.

This course is aimed at users of mobile access towers (both alloy and fibreglass) and instructs delegates on how to safely erect, move, inspect and dismantle mobile access towers. The course is recognised by the HSE. The official PASMA (Prefabricated Access Suppliers and Manufacturers Association) certification satisfies the ‘Provision and Use of Work Equipment Regulations 1998’ (PUWER) and the ‘Work at Height Regulations 2005.’

This course is the internationally recognised operators course, which teaches delegates how to use specific catagories of Mobile Elevated Work Platform. It concentrates on the safe use of MEWP's, enabling delegates to become fully competent to drive MEWP's safely. This course concentrates on the Scissor Lift (SL) AND the Self Propelled Boom (SPB) these machines are also known as Cherry Pickers, Genie Lifts, JLG's and Magic Carpets

This course is aimed at users of mobile access towers (both alloy and fibreglass) and instructs delegates on how to safely erect, move, inspect and dismantle mobile access towers. The course is recognised by the HSE. The official PASMA (Prefabricated Access Suppliers and Manufacturers Association) certification satisfies the ‘Provision and Use of Work Equipment Regulations 1998’ (PUWER) and the ‘Work at Height Regulations 2005.’

This course will run for a total of 18 hours including the examination. Maximum of 6 hours per day. At the end of the course the examination is conducted by two independent assessors. Successful candidates receive a certificate valid for 3 years from the examination date. This course is HSE approved.

This course is aimed at users of mobile access towers (both alloy and fibreglass) and instructs delegates on how to safely erect, move, inspect and dismantle mobile access towers. The course is recognised by the HSE. The official PASMA (Prefabricated Access Suppliers and Manufacturers Association) certification satisfies the ‘Provision and Use of Work Equipment Regulations 1998’ (PUWER) and the ‘Work at Height Regulations 2005.’

This course is the internationally recognised operators course, which teaches delegates how to use specific catagories of Mobile Elevated Work Platform. It concentrates on the safe use of MEWP's, enabling delegates to become fully competent to drive MEWP's safely. This course concentrates on the Scissor Lift (SL) AND the Self Propelled Boom (SPB) these machines are also known as Cherry Pickers, Genie Lifts, JLG's and Magic Carpets

The Site Supervisor Safety Training Scheme (SSSTS) course has been designed to meet the needs of site supervisors within the construction industry. This course is for first line managers – those who have to, or are about to, acquire supervisory responsibilities. The course aims to highlight the need for risk assessment in the workplace, implementation of the necessary control measures and adequate communication and monitoring in order to provide and maintain positive standards of health, safety and welfare on a construction site. The SSSTS training course is designed to ensure that candidates have an overview and understanding of their responsibility for supervising and helping to oversee safety in a construction site environment. The SSSTS training course is an ideal lead in for delegates who will go on to attend the five-day CITB Site Management Safety Training Scheme (SMSTS) at a later stage of their career development.

This course is aimed at users of mobile access towers (both alloy and fibreglass) and instructs delegates on how to safely erect, move, inspect and dismantle mobile access towers. The course is recognised by the HSE. The official PASMA (Prefabricated Access Suppliers and Manufacturers Association) certification satisfies the ‘Provision and Use of Work Equipment Regulations 1998’ (PUWER) and the ‘Work at Height Regulations 2005.’

This course is aimed at users of mobile access towers (both alloy and fibreglass) and instructs delegates on how to safely erect, move, inspect and dismantle mobile access towers. The course is recognised by the HSE. The official PASMA (Prefabricated Access Suppliers and Manufacturers Association) certification satisfies the ‘Provision and Use of Work Equipment Regulations 1998’ (PUWER) and the ‘Work at Height Regulations 2005.’

This course is the internationally recognised operators course, which teaches delegates how to use specific catagories of Mobile Elevated Work Platform. It concentrates on the safe use of MEWP's, enabling delegates to become fully competent to drive MEWP's safely. This course concentrates on the Scissor Lift (SL) AND the Self Propelled Boom (SPB) these machines are also known as Cherry Pickers, Genie Lifts, JLG's and Magic Carpets